Update to Trikombin version 4.0 (Operating system version 5.0)
Please note:
- Please allow about 10 minutes of your time for the update.
- Your licenses, user-defined programs and settings will not be overwritten by the update.
- Prerequisite for the update is at least Trikombin Version 3.2.
- The update should only be carried out if the batteries are charged to at least 50%. You can also perform the update while charging the batteries.
Installation Instructions
- Copy the file "trikombin_os_update.5_0_0_0.7z" into the root directory of a USB stick. The root directory should not contain any other files that end with ".7z".
- Insert the USB stick into the appropriate socket on the Trikombin device. It is located below the rotary encoder.
- Turn off the device.
- Hold down the "Esc" key and turn the power back on. The device starts into the Maintenance mode. You can release the "Esc" key when the screen shows "Trikombin - maintenance".
- Press key "1" or click "Update System (Key '1')".
- After 30 to 60 seconds the message "Ready to update the device. Continue?" is displayed. Confirm it by pressing the "Enter" key or click "Yes".
- The update is not being conducted.
- After one or two minutes the message "Update finished successfully! Reboot system?" is displayed. Confirm this by pressing the "Enter" key.
Verifying the Installation
- Click on "Maintenance".
- The following version numbers should now be displayed:
- Trikombin program: 4.0.2#3
- Database: 8
- Frequency tables: 8
- Linux: 5
- FPGA: 3.1
Previous Software Versions