Suggestions on how to proceed

Dear friends of Trikombin:

On 12.12.2014 Dr. Hohl sent out an email, which includes the exposition of his therapeutic approach in practice, which I would like to publish here.

As I have already pointed out in the advanced seminar in Achau, for the future I ask everyone to post such releases on the Trikombin forum, which was indeed set up exactly for this purpose. Everyone is interested in it; it encourages the exchange and gives us new ideas and approaches.

Certificates of participation

By the way, if someone wants to get a certificate of participation from the „Lehrinstitut Baklayan für bioenergetische Ordnungs-Therapie”, please send me the name and address. I have not received a list of participants.

The certificate is very important as it intends to bring into life the “certified Trikombin user” and then the „qualified Trikombin user“ with therapist lists that are published at corresponding locations.

I would point out that my seminars may only be certified by me.

Here is the procedure of Dr. Hohl:

Therapy settings Trikombin in my daily practice

Testing + therapy levels + meridians:

1. For testing select level 1 and the following switch position:

ON TRI SWEEP HIGH 120° phase shift wobble

In wobble direction: right arrow

Then test all levels and add those which connect with the program. Take over those levels with tested time for therapy.

2. Then select the following switch position and start again with level 1:

ON TRI SWEEP LOW 120° phase shift wobble

In wobble direction: right arrow

Further procedure as above.

The level of the lowest frequency I only test once all other levels are balanced.

3. Test of meridians:

I always choose the highest level found for therapy. However, if level 18 is included, then I choose it to test the meridians. HIGH and LOW is chosen the same way as in the level, i.e. if the level has been tested in HIGH, then I also test the meridians in HIGH, if the level has been tested in LOW, then I also test the meridians in LOW.

Testing + therapy test trays DTS:

For about 4 weeks Christian, Oliver and I have been using a program created by ourselves for testing and treating of all ampules, in which we do not have to rethink so much.

Setting: level 5

ON TRI SWEEP HIGH or LOW 120° phase shift wobble 3

Modulation 8

This setting we have saved as program 7005. Now you, at the same time, treat the ampules on level 4 to 9 and you do not need to change the levels.

The same you store on level 12 as program 7012 and with level 19 as the program 7019.

Some very important notes:

Initially this system is suitable when working without ampules.

We will over time anyways have to distinguish between two approaches.

1 – Trikombin application without ampules using the body’s own fluids

2 – Trikombin application with ampules for example with DTS – differential treatment systematics (or other systematics)

Regarding (1) as I said this approach is suitable.

You could then from the Trikombin handbook from the list of indications test and apply symptomatically related therapies.

For example, in angina pectoris therapy the no° 0810/1510/2210 test etc.

This already constitutes an own therapy systematic.

Regarding (2), the procedure is also suitable to balance out the patient, but here you need to know, as discussed during the advanced seminar in Achau, that the entire diagnosis (such as element testing and load testing) must be done in advance, as after the compensation of the patient the situation changes and under certain circumstances important loads can be overlooked.

A lot does not test anymore in an energetically regulating patient after this therapy, which, however, diagnostically is very important to know.

You should not consider the argument that then only the essentials test. This way you overlook the important.

For example, the element testing changes and the situation is no longer clear. Bioenergetic blockades test barely and I sometimes forget to point out the issue for the patient.

Even viruses first test less; you basically overlook many low-lying loads.

Let’s look at the suggestion “testing with level 5 W3, modulation 8.

This is a very interesting idea.

Unfortunately, it means that about 12 percent of loads go unnoticed.

This is due to the technical implementation that is „how“ modulations are produced. Each technician is expected to immediately know what I mean by that.

Anyway, 12 percent of loads going unnoticed is not a small amount and after the verification by the therapists of the working group, I cannot recommend this simplification with good conscience. (Although I would have wished to do so)

I do not think it is difficult to remember the three programs, i.e.

level 5 W3 for bacteria, environmental toxins, fungi

level 8 W3 for elements, meridians, energetic blockades and

level 9 W3 for parasites, viruses, Borrelia.

Especially if you then add the modulation 128-fold to these three programs, you get much deeper into the tissue and the above-mentioned test failure of 12 percent increases up to 20 percent.

Now that would be a real shame.

So much for these suggestions, which I have been looking forward to, because it shows that therapists ponder and maybe one or another person may gain something for themselves.

Yours sincerely,

Your Alan Baklayan.